Automatic Manifold Controller for Medical Gas Supply

Description

Medical Gas Manifold Controller, the automatic change over decompression unit is designed to supply medical gas (oxygen-nitrous oxide-air-nitrogen-carbon dioxide) of any type of medical gas network, where continuity of supply is essential and where the pipeline is supplied from manifold high pressure gas cylinders. Complies with all current safety regulations and laws and is designed and tested to guarantee safe operation.
Automatic central manifold system for medical gases (O2, N2O, Air, N2, CO2) with pressure reducers, high pressure shut-off valves, automatic change over unit, analogue sensors, cylinder ramps, flexible connections, pigtails, cylinder holders and emergency inlet point is according to EN ISO 7396-1, HTM 02-01 and NFPA 99 standards.

Features:

• Fully automatic, automatically changeover on Left/Right cylinder ramp/cylinder bank
• Built-in digital aream alarm panel
• Built-in high-pressure medical gas sensor
• 10 or 12 outputs digital signals used for: a) repeating to second panel, b) central alarm system, c) BMS of installation.
• Built in 10 or 18 LED, 2 red LED for each gas, 1 for high and 1 for low pressure indication and 1 green for Normal
• Built in buzzer for alarm signaling
• LCD display (2×16 characters) for real time pressure monitoring and text messages corresponding to alarm conditions
• Adjustable limits and alarm messages (by user programming through TCP/IP web page interface)
• Adjustable analog sensors range and type
• Alarm programming through Ethernet connection with an IP address
• Button test and silence
• Leakage test procedures according to EN ISO 7396-1, HTM 02-01 and NFPA-99 standards

Technical Parameter